On this page, we will guide you on how to install the official stock ROM flash file on your MyPhone myP1. Well, the device is based on Android 9.0 Pie which is powered by the Spreadtrum Unisoc SC7731E processor. This guide will be helpful to unbrick or fix any software issues on your device.

To install the firmware flash file on MyPhone myP1, you need to download the software called SPD Flash tool (also known as Spreadtrum flash tool). This method simple and easy. We have also added video and step by step tutorial to make things easier to flash the firmware file.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the MyPhone myP1 Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from MyPhone myP1
  • You can fix the boot loop issue on MyPhone myP1
  • Fix Unfortunately, the app has stopped error on MyPhone myP1
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot MyPhone myP1
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore MyPhone myP1 back to Factory State

How to Flash MyPhone myP1 Firmware File

Before installing the Stock ROM on your MyPhone myP1, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

  • Supported device: MyPhone myP1
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup of your android phone
  • Download Drivers and Tools: Spreadtrum drivers, SPD Flash Tool, and Android USB Drivers

MyPhone myP1 Flash Files

Instructions to Install: via SPD Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

That’s it, guys. We hope that you’ve installed the Stock Firmware on your MyPhone myP1 device successfully. Feel free to ask in the comments below for any queries.