In this tutorial, we will guide you on how to install the stock Firmware flash file on Motorola One XT1941-3 (deen). The device came out of the box with Android 8.1 Oreo and is powered by Qualcomm Snapdragon 625. If you are someone who is looking to fix your device’s common issues like boot loop, repair IMEI, or fix any software issue, then this guide is for you.

To install the firmware flash file on Motorola One XT1941-3, you need to download the software called ADB and Fastboot tool. This method is simple and easy.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Motorola One XT1941-3 (deen) Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Motorola One
  • You can fix the boot loop issue on Motorola One
  • Fix Unfortunately, the app has stopped errors on Motorola One
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Motorola One
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Motorola One back to Factory State

Motorola One XT1941-3 Firmware Flash Files:

Steps to Install Motorola XT1941-3 Firmware Flash File

If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Motorola One XT1941-3. Make sure to follow the steps carefully.

Pre-Requirements:

  • This ROM is supported for the Motorola One XT1941-3 (deen) variant only.
  • Make sure that your device should be charged at least 50% or higher.
  • You will require a PC or Laptop with a USB Data Cable.
  • We always recommend our readers take a full data backup of the device for safety purposes.
  • Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
  • To flash, you must download the ADB and Fastboot tool

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola One XT1941-3. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Disclaimer:

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device is turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola One into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

  • The next step is to open the command window and go to the adb folder
  • Enter the following command to flash the firmware.
  • fastboot oem fb_mode_set
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash vbmeta vbmeta.img
  • fastboot flash radio radio.img
  • fastboot flash logo logo.bin
  • fastboot flash boot boot.img
  • fastboot flash dtbo dtbo.img
  • fastboot flash recovery recovery.img
  • fastboot flash super super.img_sparsechunk.0
  • fastboot flash super super.img_sparsechunk.1
  • fastboot flash super super.img_sparsechunk.2
  • fastboot flash super super.img_sparsechunk.3
  • fastboot flash super super.img_sparsechunk.4
  • fastboot flash super super.img_sparsechunk.5
  • fastboot flash super super.img_sparsechunk.6
  • fastboot flash super super.img_sparsechunk.7
  • fastboot flash super super.img_sparsechunk.8
  • fastboot flash super super.img_sparsechunk.9
  • fastboot flash super super.img_sparsechunk.10
  • fastboot flash super super.img_sparsechunk.11
  • fastboot flash super super.img_sparsechunk.12
  • fastboot flash super super.img_sparsechunk.13
  • fastboot flash super super.img_sparsechunk.14
  • fastboot flash super super.img_sparsechunk.15
  • fastboot flash dsp dspso.bin
  • fastboot flash erase userdata
  • fastboot flash erase ddr
  • fastboot oem fb_mode_clear
  • Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash vbmeta vbmeta.img fastboot flash radio radio.img fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash dtbo dtbo.img fastboot flash recovery recovery.img fastboot flash super super.img_sparsechunk.0 fastboot flash super super.img_sparsechunk.1 fastboot flash super super.img_sparsechunk.2 fastboot flash super super.img_sparsechunk.3 fastboot flash super super.img_sparsechunk.4 fastboot flash super super.img_sparsechunk.5 fastboot flash super super.img_sparsechunk.6 fastboot flash super super.img_sparsechunk.7 fastboot flash super super.img_sparsechunk.8 fastboot flash super super.img_sparsechunk.9 fastboot flash super super.img_sparsechunk.10 fastboot flash super super.img_sparsechunk.11 fastboot flash super super.img_sparsechunk.12 fastboot flash super super.img_sparsechunk.13 fastboot flash super super.img_sparsechunk.14 fastboot flash super super.img_sparsechunk.15 fastboot flash dsp dspso.bin fastboot flash erase userdata fastboot flash erase ddr fastboot oem fb_mode_clear