Lenovo-owned smartphone brand Motorola has launched its first-ever pop-up selfie camera device called Motorola One Hyper. The handset is running on the Android One program based on Android 10.0 out-of-the-package. Therefore, it also ensures that the device will receive two consecutive years of major Android updates and three years of frequent security patch updates. The Motorola One Hyper is available in the USA, Europe, and Latin America currently. If you’re using this handset, here you will get the Motorola One Hyper Software Update Tracker list along with the installation guide below.

Now, you may ask why Software Update Tracker? There are two reasons such as either you’ve missed out on any OTA update and now you’re going to install it or you need the Stock Firmware. Sometimes, users may get stuck into boot loop or face bricking issues due to third-party firmware flashing or installing custom modules, or rooting their devices. In all those situations, installing the Stock ROM on your phone will fix most of the problems completely.

Here we have shared the full firmware update list along with the ADB Sideload method and Stock Recovery method. Now, before going to the installation steps, let’s take a quick look at the device overview below, and then we will head over to the software update tracker.

Motorola One Hyper Specifications

The device has a 6.5-inches Full-HD+ IPS LCD display at a resolution of 1080×2340 pixels. It runs on Android 10 with Android One support and powered by Qualcomm Snapdragon 675 SoC. While the device packs Adreno 612 GPU, 4GB RAM, 128GB of internal storage. The storage is expandable up to 1TB via a MicroSD card.

It sports a dual rear camera setup of a 64MP (f/1.8) wide-angle sensor and an 8MP ultrawide sensor. The rear cameras have PDAF, an LED flash, HDR, Panorama support. While the front features a 32MP (wide, f/2.0) motorized pop-up selfie camera with HDR mode.

The phone is backed by a 4000mAh battery with 45W fast charging support. It has the Wi-Fi 802.11 a/b/g/n/ac, a 3.5mm audio jack, Bluetooth 5.0, GPS, A-GPS, GLONASS, NFC, USB Type-C port, etc. In terms of the sensors, it has a rear-mounted fingerprint sensor, gyroscope, an accelerometer, proximity, and a compass sensor.

Motorola One Hyper Software Update Tracker

Currently, the Motorola One Hyper device has received its first software update. We will keep updating the post whenever a new software version will be available for this device. So, keep visiting this page for more updates.

Motorola XT2027-1 Firmware Flash Files:

Motorola XT2027-3 Firmware Flash Files:

Steps to Install Motorola One Hyper Stock ROM

First of all, check out all the requirements below and make sure to download the firmware according to the region.

Pre-Requirements:

  • File Supported for: Motorola One Hyper.
  • A PC/Laptop and a USB Cable required.
  • Motorola USB Drivers – Download and Install it on the computer.
  • Download the ADB & Fastboot Tool on your PC (For Fastboot Method Only).
  • Maintain the battery level of more than 60%.
  • Take a complete backup without the root of your device.
  • Enable the Developer Options and USB Debugging.
  • Download the firmware file on your device (SD card).
  • Next, restart your device into Stock Recovery Mode.
  • Select Apply Update from SD card.
  • Choose and select the firmware zip file.
  • Your device will install and apply the update. Have some patience.
  • The device will boot into a new system version. Enjoy!

Via ADB Sideload Method

Simple guide to ADB Sideload Firmware on Motorola One Hyper

That’s it, guys. We hope that you’ve successfully upgraded or installed the latest firmware on your Motorola One Hyper device. Let us know in the comments below for any queries.