If you are using the Motorola One Action device and want to install a Stock ROM on it, you’re in the right place. Here in this article, we will share with you the Motorola One Action software update tracker. We will also provide you the download links and requirements which will useful for you to install the Stock ROM. Follow the full guide on how to install the stock firmware via the ADB Sideload method.

Android is an open-source software that runs on the Linux platform. It’s developed by Google and works so well with so many customizations. Due to the customization and open-source nature, the developers can easily get kernel source and develop any Custom ROM or mods, or root, etc. In case, you’re using any third-party firmware on your device and now want to go back to the stock firmware again, this guide is for you. Sometimes users face problems like screen freezing, touch unresponsive, camera error, device stuck, software bugs, or boot loop, etc.

Therefore, users can easily install the Stock Firmware on the device in order to fix all of these issues including bricking issues or warranty void issues. We have mentioned the Stock ROM advantages below which you can follow.

Also Read

List of Best Custom ROM for Motorola One Action [How to]

Download and Install AOSP Android 13 on Motorola One Action

Advantages of Stock Firmware:

  • Unbrick your Motorola One Action device
  • Fix the bootloop issue
  • Upgrade and Downgrade software version on Motorola One Action
  • Unroot or Fix Bugs on your phone
  • Fix lag or performance or battery issue
  • Fix Google App, Camera, device security issue
  • Go back to stock will gain the device warranty again for newer devices

Motorola One Action Specifications:

The Moto One Action features a 6.3-inch Full-HD+ display with a punch-hole camera. It runs on Android 9 Pie on the top of the Android One program. The handset runs on Samsung’s Exynos 9609 SoC coupled with Mali-G72 MP3 GPU. It packs 3GB/4GB of RAM and 32GB/64GB/128GB of inbuilt storage options. The storage can be expanded up to 1TB via a MicroSD card.

The device features a triple rear camera setup of 48MP+5MP+2MP sensors along with an LED flash. While the front features a single 25MP punch-hole selfie camera which looks great. It packs a 3,500 mAh Li-Po non-removable battery and comes with Motorola Turbo Power Charging support. It features a 3.5mm audio jack, Bluetooth 5, Wi-Fi 802.11 a/b/g/n/ac, dual-band Wi-Fi, Micro-USB port, GPS, A-GPS, FM Radio, Wi-Fi Direct, and more. While there are some of the sensors available like accelerometer, gyro, proximity, compass, and a rear fingerprint sensor.

Motorola One Action Software Update:

Motorola One Action XT2013-2 Firmware Flash Files:

Motorola One Action XT2013-1 Firmware Flash Files:

Motorola One Action XT2013-4 Firmware Flash Files:

Steps to Install Motorola One Action Stock Firmware:

Before installing the stock firmware on the Motorola One Action device, make sure to follow all the pre-requirements and install all the necessary drivers and tools on your PC. It’s recommended to keep a backup of internal storage of the device as well.

Pre-Requirements:

  • This ROM is supported only for Motorola One Action.
  • You will require a PC/Laptop and a USB Cable as well.
  • Download and Install the latest Motorola USB Drivers for PC.
  • Download and extract the ADB fastboot tool on your PC (Fastboot Method).
  • Keep your device battery charged up to 60% at least for a smoother process.
  • Take a complete backup without the root of your device.

Guide to Install: via ADB Sideload Method (Moto One Action Software Update)

  • Now, navigate to the folder where you’ve extracted the ADB and Fastboot Tools.
  • We assume that you have already downloaded the Stock ROM file. Now, move it into the ADB folder on your PC.
  • Then reboot your handset into Stock Recovery Mode.
  • Select Apply Update from ADB from the Stock Recovery mode.
  • Now, connect your phone with the PC via a USB cable, then open the command prompt window by pressing the Shift key + right mouse click.
  • Now, type the below command and hit enter:

adb sideload Filename.zip

  • The installation process may take a few seconds or more. You have to wait for it.
  • After the complete installation, reboot the handset for once.
  • Done.

Motorola One Action Software Update via Recovery (Manually)

  • Go to the device Settings > About Phone > Tap on Build Number 7 Times to enable Developer options.
  • Next, go to the Developer Options > Enable USB Debugging.
  • After downloading the firmware file, move it to the device internal storage.
  • Now, reboot into Stock Recovery Mode.
  • Select Apply Update from SD card.
  • Choose the downloaded zip file from SD card.
  • Wait until the installation process completes and then reboot the device.

That’s it! Hope that you have successfully installed Stock Firmware on Moto One Action smartphone easily.