On this page, we have shared the download link and guide to install the Moto G30 (caprip, capri plus) firmware flash file using the ADB Fastboot method. To flash the Moto G30 back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Moto G30 Specifications:

The Moto G30 features a 6.5-inches IPS LCD panel with a resolution of 720 x 1600 pixels and an aspect ratio of 20:9. There is no high refresh rate offering with this IPS panel. Powering the device is the Qualcomm Snapdragon 450. This is a budget offering from Qualcomm in terms of mobile processors built on an 11nm manufacturing process. This octa-core processor features four Kryo 240 cores clocked at 1.8GHz and four Kryo 240 cores clocked at 1.6 GHz.

In terms of optics, we have a quad-camera setup at the rear and a single camera at the front. The rear setup consists of a 48MP primary camera paired with an f/1.7 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. At the front, we get a single 8MP sensor paired with an f/2.2 lens. Both the front and the rear setup are capable of capturing only 1080p videos. The rear camera can do it with 60fps, while the front is only limited to 30fps.

There is only a single storage variant of this smartphone with 4GB of RAM and 64GB of internal storage. There is a Hybrid SIM slot for storage expansion via a MicroSD card. In terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, FM radio, and USB Type-C 2.0. For sensors, we have a rear-mounted fingerprint sensor, accelerometer, gyro, and proximity. As mentioned above, this smartphone packs in a huge 6,000 battery that can be charged up quickly using a 20W fast charging adapter. The smartphone is available in two color options: Aurora Grey and Breeze Blue.

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Moto G30
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Moto G30
  • Unroot or Fix Bugs on your Phone
  • To fix the lag or stutter on Moto G30.
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Moto G30 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

  • This ROM is supported only for Moto G30.
  • Download and Install the latest Motorola USB Drivers for Windows and MAC. [For All Android USB Drivers]
  • Download and extract the ADB fastboot tool on your PC (Fastboot Method)
  • Charge your phone to at least 60-70% before upgrading your Phone.
  • Take a complete backup (Recommended)
  • —–> How to Backup Your Android Phone Without ROOT
  • —–> Backup Your Android Apps and Data with Titanium Backup
  • —–> How to Backup Your Data on an Android device

Download Flash Files:

Motorola Moto G30XT2129-2 Firmware Flash Files:

Motorola Moto G30 XT2129-1 Firmware Flash Files:

Instructions to Install: via ADB Sideload Method

  • Now go to the folder where you have extracted the ADB and Fastboot Tools.
  • Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
  • Now Reboot Moto smartphone to Recovery Mode.
  • Select Apply Update from ADB.
  • Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
  • Now execute the below command on the CMD screen.
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash vbmeta_system vbmeta_system.img
  • fastboot flash vbmeta vbmeta.img
  • fastboot flash radio radio.img
  • fastboot flash bluetooth BTFM.bin
  • fastboot flash dsp dspso.bin
  • fastboot flash logo logo.bin
  • fastboot flash boot boot.img
  • fastboot flash vendor_boot vendor_boot.img
  • fastboot flash dtbo dtbo.img
  • fastboot flash super super.img_sparsechunk.0
  • fastboot flash super super.img_sparsechunk.1
  • fastboot flash super super.img_sparsechunk.2
  • fastboot flash super super.img_sparsechunk.3
  • fastboot flash super super.img_sparsechunk.4
  • fastboot flash super super.img_sparsechunk.5
  • fastboot flash super super.img_sparsechunk.6
  • fastboot flash super super.img_sparsechunk.7
  • fastboot flash super super.img_sparsechunk.8
  • fastboot flash super super.img_sparsechunk.9
  • fastboot erase userdata
  • fastboot erase ddr
  • fastboot oem fb_mode_clear
  • fastboot reboot
  • Wait until the Installation process Completes.
  • Once the installation completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Disclaimer

We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash vbmeta_system vbmeta_system.img fastboot flash vbmeta vbmeta.img fastboot flash radio radio.img fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash vendor_boot vendor_boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img_sparsechunk.0 fastboot flash super super.img_sparsechunk.1 fastboot flash super super.img_sparsechunk.2 fastboot flash super super.img_sparsechunk.3 fastboot flash super super.img_sparsechunk.4 fastboot flash super super.img_sparsechunk.5 fastboot flash super super.img_sparsechunk.6 fastboot flash super super.img_sparsechunk.7 fastboot flash super super.img_sparsechunk.8 fastboot flash super super.img_sparsechunk.9 fastboot erase userdata fastboot erase ddr fastboot oem fb_mode_clear fastboot reboot

Manually Update Moto G30 Stock Firmware via Recovery

  • First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  • Go to Developer Options –> Enable USB Debugging.
  • Download Android Nougat for Moto from above and save it in Internal storage.
  • Now Reboot Moto to Recovery Mode.
  • Select Apply Update from SD Card.
  • Select the Downloaded ZIP file from SD Card.
  • Wait until the Installation process Completes.
  • Once the installation completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Moto G30 Smartphone.

I hope you installed the Stock ROM on Moto G30 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.