On this page, we have shared the download link and guide to install the Moto G100 (nio) firmware flash file using the ADB Fastboot method. To flash the Moto G100 back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Also Read

Download and Install AOSP Android 13 on Motorola Moto G100 (Edge S)

List of Best Custom ROM for Motorola Moto G100 [Updated]

 

The Advantage of Stock Firmware

  • Flash Stock To Unbrick your Moto G100
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Moto G100
  • Unroot or Fix Bugs on your Phone
  • To fix the lag or stutter on Moto G100.
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

Steps to Install Moto G100 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

  • This ROM is supported only for Moto G100.
  • Download and Install the latest Motorola USB Drivers for Windows and MAC. [For All Android USB Drivers]
  • Download and extract the ADB fastboot tool on your PC (Fastboot Method)
  • Charge your phone to at least 60-70% before upgrading your Phone.
  • Take a complete backup (Recommended)
  • —–> How to Backup Your Android Phone Without ROOT
  • —–> Backup Your Android Apps and Data with Titanium Backup
  • —–> How to Backup Your Data on an Android device

Download Flash Files:

Moto G100 Stock Firmware XT2125-4:

Instructions to Install: via ADB Sideload Method

  • Now go to the folder where you have extracted the ADB and Fastboot Tools.
  • Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
  • Now Reboot Moto smartphone to Recovery Mode.
  • Select Apply Update from ADB.
  • Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click
  • Now execute the below command on the CMD screen.
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash vbmeta_system vbmeta_system.img
  • fastboot flash vbmeta vbmeta.img
  • fastboot flash radio radio.img
  • fastboot flash bluetooth BTFM.bin
  • fastboot flash dsp dspso.bin
  • fastboot flash logo logo.bin
  • fastboot flash boot boot.img
  • fastboot flash vendor_boot vendor_boot.img
  • fastboot flash dtbo dtbo.img
  • fastboot flash super super.img_sparsechunk.0
  • fastboot flash super super.img_sparsechunk.1
  • fastboot flash super super.img_sparsechunk.2
  • fastboot flash super super.img_sparsechunk.3
  • fastboot flash super super.img_sparsechunk.4
  • fastboot flash super super.img_sparsechunk.5
  • fastboot flash super super.img_sparsechunk.6
  • fastboot flash super super.img_sparsechunk.7
  • fastboot flash super super.img_sparsechunk.8
  • fastboot flash super super.img_sparsechunk.9
  • fastboot erase userdata
  • fastboot erase ddr
  • fastboot oem fb_mode_clear
  • fastboot reboot
  • Wait until the Installation process Completes.
  • Once the installation completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Disclaimer

We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash vbmeta_system vbmeta_system.img fastboot flash vbmeta vbmeta.img fastboot flash radio radio.img fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash vendor_boot vendor_boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img_sparsechunk.0 fastboot flash super super.img_sparsechunk.1 fastboot flash super super.img_sparsechunk.2 fastboot flash super super.img_sparsechunk.3 fastboot flash super super.img_sparsechunk.4 fastboot flash super super.img_sparsechunk.5 fastboot flash super super.img_sparsechunk.6 fastboot flash super super.img_sparsechunk.7 fastboot flash super super.img_sparsechunk.8 fastboot flash super super.img_sparsechunk.9 fastboot erase userdata fastboot erase ddr fastboot oem fb_mode_clear fastboot reboot

Manually Update Moto G100 Stock Firmware via Recovery

  • First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
  • Go to Developer Options –> Enable USB Debugging.
  • Download Android Nougat for Moto from above and save it in Internal storage.
  • Now Reboot Moto to Recovery Mode.
  • Select Apply Update from SD Card.
  • Select the Downloaded ZIP file from SD Card.
  • Wait until the Installation process Completes.
  • Once the installation completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Moto G100 Smartphone.

I hope you installed the Stock ROM on Moto G100 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.