On this page, we have shared the download link and guide to install the Motorola XT2015-2 (Moto G8 Play) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Motorola G8 Play XT2015-2.
If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.
Steps to Install Motorola XT2015-2 Stock Firmware (Flash File)
Now, if you’re ready to flash the stock firmware manually on your Motorola G8 Play XT2015-2 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.
Pre-Requirements:
- This ROM is supported for the Motorola G8 Play XT2015-2 (lima_32) variant only.
- Make sure that your device should be charged at least 50% or higher.
- You will require a PC or Laptop with a USB Data Cable.
- We always recommend our readers take a full data backup of the device for safety purposes.
- Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
- To flash, you must download the ADB and Fastboot tool
Motorola G8 Play XT2015-2 Firmware Flash Files:
Firmware Installation Guide:
Check out the firmware flashing guide below for the Motorola G8 Play XT2015-2. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.
Disclaimer:
Step 1. Bootloader Mode
Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device is turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.
Step 2. Connect Your Device to PC:
After booting your Motorola G8 Play into bootloader mode, now connect it to the PC using the USB Cable.
Step 3. Download Stock ROM/Firmware:
To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.
You can also download the full stock ROM from the above download flash file section on this guide.
Step 4. Flashing Guide:
- The next step is to open the command window and go to the adb folder
- Enter the following command to flash the firmware
- fastboot oem fb_mode_set
- fastboot flash preloader preloader.bin
- fastboot flash lk_a lk.img
- fastboot flash tee_a tee.img
- fastboot flash md1img_a md1img.img
- fastboot flash spmfw_a spmfw.img
- fastboot flash scp_a scp.img
- fastboot flash sspm_a sspm.img
- fastboot flash cam_vpu1_a cam_vpu1.img
- fastboot flash cam_vpu2_a cam_vpu2.img
- fastboot flash cam_vpu3_a cam_vpu3.img
- fastboot flash vbmeta_a vbmeta.img
- fastboot flash oem oem.img
- fastboot flash logo_a logo.bin
- fastboot flash boot_a boot.img
- fastboot flash dtb_a dtb.img
- fastboot flash dtbo_a dtbo.img
- fastboot flash recovery recovery.img
- fastboot flash system_a system.img_sparsechunk.0
- fastboot flash system_a system.img_sparsechunk.1
- fastboot flash system_a system.img_sparsechunk.2
- fastboot flash system_a system.img_sparsechunk.3
- fastboot flash system_a system.img_sparsechunk.4
- fastboot flash system_a system.img_sparsechunk.5
- fastboot flash system_a system.img_sparsechunk.6
- fastboot flash system_a system.img_sparsechunk.7
- fastboot flash system_a system.img_sparsechunk.8
- fastboot flash system_b system_other.img_sparsechunk.0
- fastboot flash system_b system_other.img_sparsechunk.1
- fastboot flash system_b system_other.img_sparsechunk.2
- Toggle back to bootloader. Do the following:
- fastboot reboot bootloader
- fastboot erase ddr
- fastboot erase userdata (Optional except you want to wipe)
- fastboot reboot
- Now your device will reboot into bootloader with the firmware you installed.
That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.
fastboot oem fb_mode_set
fastboot flash preloader preloader.bin fastboot flash lk_a lk.img
fastboot flash tee_a tee.img
fastboot flash md1img_a md1img.img
fastboot flash spmfw_a spmfw.img
fastboot flash scp_a scp.img
fastboot flash sspm_a sspm.img
fastboot flash cam_vpu1_a cam_vpu1.img
fastboot flash cam_vpu2_a cam_vpu2.img
fastboot flash cam_vpu3_a cam_vpu3.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash oem oem.img
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtb_a dtb.img
fastboot flash dtbo_a dtbo.img
fastboot flash recovery recovery.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_b system_other.img_sparsechunk.0
fastboot flash system_b system_other.img_sparsechunk.1
fastboot flash system_b system_other.img_sparsechunk.2
fastboot reboot bootloader fastboot erase ddr fastboot erase userdata (Optional except you want to wipe) fastboot reboot
