On this page, we have shared the download link and guide to install the Motorola XT2128-3 (Moto G20, codenamed java) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Motorola G20 XT2128-3.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Motorola Moto G20 Device Overview:

The Moto G20 features a 6.5-inches IPS LCD panel with a resolution of 720 x 1600 pixels and an aspect ratio of 20:9. This is a high refresh rate panel with a 90Hz refresh rate. In terms of processing power, we get the Unisoc T700 chipset which is an octa-core processor. It comes with eight cores clocked at 1.8 GHz. And for graphics-intensive tasks, we have Mali G52. The processor is a bit on the weaker side, but it will work fine with basic day to day applications.

We have a quad-camera setup at the rear and a single camera setup at the front in terms of optics. The quad rear camera consists of a 48MP primary sensor paired with an f/1.7 lens, an 8Mp ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. The front camera is a 13MP sensor paired with an f/2.2 lens. Both the front and the rear camera setup is limited to 1080p video recording at 30fps.

The Moto G20 comes with two storage options: 4GB RAM + 64GB internal storage and 4GB RAM + 128GB internal storage. There is also a hybrid SIM slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we have a rear-mounted fingerprint sensor, accelerometer, gyro, and proximity. Powering it all up is a 5,000 mAh cell that supports 10W charging. The smartphone comes in two colour options: Breeze Blue and Flamingo Pink.

Steps to Install Motorola XT2128-3 Stock Firmware

Now, if you’re ready to flash the stock firmware manually on your Motorola G20 XT2128-3 (java) device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

  • This ROM is supported for the Motorola G20 XT2128-3 (java) variant only.
  • Make sure that your device should be charged at least 50% or higher.
  • You will require a PC or Laptop with a USB Data Cable.
  • We always recommend our readers take a full data backup of the device for safety purposes.
  • Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
  • To flash, you must download the ADB and Fastboot tool

Motorola G20 XT2128-3 Firmware Flash Files:

Instructions to Install: via SPD Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

Disclaimer:

Guide to Install Stock ROM using SPD Flash Tool

Firmware Installation Guide (Using ADB and Fastboot Tool):

Check out the firmware flashing guide below for the Motorola G20 XT2128-3 (java). First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola G20 into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

  • The next step is to open the command window and go to the adb folder
  • Enter the following command to flash the firmware.
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash vbmeta_system vbmeta_system.img
  • fastboot flash vbmeta vbmeta.img
  • fastboot flash radio radio.img
  • fastboot flash bluetooth BTFM.bin
  • fastboot flash dsp dspso.bin
  • fastboot flash logo logo.bin
  • fastboot flash boot boot.img
  • fastboot flash vendor_boot vendor_boot.img
  • fastboot flash dtbo dtbo.img
  • fastboot flash super super.img_sparsechunk.0
  • fastboot flash super super.img_sparsechunk.1
  • fastboot flash super super.img_sparsechunk.2
  • fastboot flash super super.img_sparsechunk.3
  • fastboot flash super super.img_sparsechunk.4
  • fastboot flash super super.img_sparsechunk.5
  • fastboot flash super super.img_sparsechunk.6
  • fastboot flash super super.img_sparsechunk.7
  • fastboot flash super super.img_sparsechunk.8
  • fastboot flash super super.img_sparsechunk.9
  • fastboot erase userdata
  • fastboot erase ddr
  • fastboot oem fb_mode_clear
  • fastboot reboot
  • Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash vbmeta_system vbmeta_system.img fastboot flash vbmeta vbmeta.img fastboot flash radio radio.img fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash vendor_boot vendor_boot.img fastboot flash dtbo dtbo.img fastboot flash super super.img_sparsechunk.0 fastboot flash super super.img_sparsechunk.1 fastboot flash super super.img_sparsechunk.2 fastboot flash super super.img_sparsechunk.3 fastboot flash super super.img_sparsechunk.4 fastboot flash super super.img_sparsechunk.5 fastboot flash super super.img_sparsechunk.6 fastboot flash super super.img_sparsechunk.7 fastboot flash super super.img_sparsechunk.8 fastboot flash super super.img_sparsechunk.9 fastboot erase userdata fastboot erase ddr fastboot oem fb_mode_clear fastboot reboot

Also Read: How to Root Moto G20 XT2128 using Magisk without TWRP

Advertisement