On this page, we have shared the download link and guide to install the Motorola Moto X4 firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Motorola Moto X4.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

About Motorola Moto X4:

Motorola Moto X4 features a 5.2-inches display with a screen resolution of 1080 x 1920 pixels with Corning Gorilla Glass protection. The smartphone is powered by Octa-core 2.2 GHz Cortex-A53 and Qualcomm Snapdragon 630 coupled with 3GB of RAM. The phone packs 32GB internal memory which can also be expanded up to 256GB via microSD card. The camera on the Motorola Moto X4 comes with Dual 12 MP, f/2.0 + 8 MP, f/2.2, phase detection autofocus, dual-LED (dual tone) flash, and 16MP front shooting camera with LED flash.

Also Read

List of Best Custom ROM for Motorola Moto X4 [Updated]

Download and Install AOSP Android 13 on Motorola Moto X4

Motorola Moto X4 runs on Android 7.1 Nougat out of the box with a Non-removable Li-Ion 3000 mAh battery with Fast battery charging. It also has a Fingerprint sensor on the front. The handset supports a dual sim with 4G on both slots. It comes with connectivity options such as Bluetooth, Wifi, USB OTG, FM, 3G, and 4G.

The Advantage Of Stock Firmware

  • Flash Stock To Unbrick your Motorola Moto X4
  • Flash Stock ROM to Fix the bootloop problem
  • Upgrade and Downgrade Motorola Moto X4
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Motorola Moto X4
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

CHECK POPULAR POST

  • How to Fix WiFi Issue on Moto X4 (Troubeshoot and Solved)
  • How To Unlock Bootloader On Moto X4 (payton)
  • How to Root Moto X4 With CF Auto Root (payton)

Steps to Install Motorola Moto X4 Stock Firmware

Now, if you’re ready to flash the stock firmware manually on your Motorola Moto X4 (payton) device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

  • This ROM is supported for the Motorola Moto X4 (payton) variant only.
  • Make sure that your device should be charged at least 50% or higher.
  • You will require a PC or Laptop with a USB Data Cable.
  • We always recommend our readers take a full data backup of the device for safety purposes.
  • Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
  • To flash, you must download the ADB and Fastboot tool

Motorola Moto X4 XT1900-2 Firmware Flash Files:

Motorola Moto X4 Retail Firmware File

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola Moto X4 (payton). First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Disclaimer:

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device is turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Moto X4 UW Ace into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Advertisement

Step 4. Flashing Guide:

  • The next step is to open the command window and go to the adb folder
  • Enter the following command to flash the firmware.
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash modem NON-HLOS.bin
  • fastboot flash fsg fsg.mbn
  • fastboot flash bluetooth BTFM.bin
  • fastboot flash dsp dspso.bin
  • fastboot flash logo logo.bin
  • fastboot flash boot boot.img
  • fastboot flash system system.img_sparsechunk.0
  • fastboot flash system system.img_sparsechunk.1
  • fastboot flash system system.img_sparsechunk.2
  • fastboot flash system system.img_sparsechunk.3
  • fastboot flash system system.img_sparsechunk.4
  • fastboot flash system system.img_sparsechunk.5
  • fastboot flash system system.img_sparsechunk.6
  • fastboot flash system_b system_other.img
  • fastboot erase userdata
  • fastboot erase ddr
  • fastboot oem fb_mode_clear
  • fastboot reboot
  • Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system_b system_other.img fastboot erase userdata fastboot erase ddr fastboot oem fb_mode_clear fastboot reboot