The Moto G 5G was unveiled on the 5th of November, and it is now available for purchase in some parts of the world. The G series from Motorola is known worldwide for the value it provides besides being a budget device. As the name suggests, this a 5G smartphone from the G series Moto phones, and here we will see what this smartphone has on offer for us.

On this page, we have shared the download link and guide to install the Motorola XT2113-3 (Moto G 5G) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Moto G 5G XT2113-3.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Also Read

List of Best Custom ROM for Motorola Moto G 5G [Updated]

Download and Install AOSP Android 13 on Motorola Moto G 5G

Steps to Install Motorola XT2113-3 Stock Firmware (Flash File)

Now, if you’re ready to flash the stock firmware manually on your Moto G 5G XT2113-3 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

  • This ROM is supported for the Moto G 5G XT2113-3 (Smith) variant only.
  • Make sure that your device should be charged at least 50% or higher.
  • You will require a PC or Laptop with a USB Data Cable.
  • We always recommend our readers to take a full data backup of the device for safety purposes.
  • Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
  • To flash, you must download the ADB and Fastboot tool

Moto G 5G XT2113-3 Firmware Flash Files:

Firmware Installation Guide:

Check out the firmware flashing guide below for the Moto G 5G XT2113-3. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Disclaimer:

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Moto G 5G into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

  • The next step is to open the command window and go to the adb folder
  • Enter the following command to flash the firmware.
  • fastboot flash partition gpt.bin
  • fastboot flash bootloader bootloader.img
  • fastboot flash bluetooth BTFM.bin
  • fastboot flash dsp dspso.bin
  • fastboot flash radio radio.img
  • fastboot flash logo logo.bin
  • Now toggle the fastbootd
  • fastboot reboot fastboot
  • Again flash the following command
  • fastboot flash boot boot.img
  • fastboot flash recovery recovery.img
  • fastboot flash dtbo dtbo.img
  • fastboot flash vbmeta vbmeta.img
  • fastboot flash super super.img.sparsechunk.0
  • fastboot flash super super.img.sparsechunk.1
  • fastboot flash super super.img.sparsechunk.2
  • fastboot flash super super.img.sparsechunk.3
  • fastboot flash super super.img.sparsechunk.4
  • fastboot flash super super.img.sparsechunk.5
  • fastboot flash super super.img.sparsechunk.6
  • fastboot flash super super.img.sparsechunk.7
  • fastboot flash super super.img.sparsechunk.8
  • Toggle back to bootloader. Do the following:
  • fastboot reboot bootloader
  • fastboot erase carrier
  • fastboot erase metadata
  • fastboot erase ddr
  • (Optional except you want to wipe) fastboot erase userdata
  • fastboot reboot
  • Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.

fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash radio radio.img fastboot flash logo logo.bin

fastboot reboot fastboot

fastboot flash boot boot.img fastboot flash recovery recovery.img fastboot flash dtbo dtbo.img fastboot flash vbmeta vbmeta.img fastboot flash super super.img.sparsechunk.0 fastboot flash super super.img.sparsechunk.1 fastboot flash super super.img.sparsechunk.2 fastboot flash super super.img.sparsechunk.3 fastboot flash super super.img.sparsechunk.4 fastboot flash super super.img.sparsechunk.5 fastboot flash super super.img.sparsechunk.6 fastboot flash super super.img.sparsechunk.7 fastboot flash super super.img.sparsechunk.8

fastboot reboot bootloader fastboot erase carrier fastboot erase metadata fastboot erase ddr (Optional except you want to wipe) fastboot erase userdata fastboot reboot